Command Line Interface
Example
SMC-AP#show logging
Logging Information
============================================
Syslog State
Logging Host State
Logging Console State
Server Domain name/IP
Logging Level
Logging Facility Type
=============================================
SMC-AP#
sntp-server ip
This command sets the IP address of the servers to which SNTP
time requests are issued. Use the this command with no
arguments to clear all time servers from the current list.
Syntax
sntp-server ip <1 | 2> <ip>
• 1 - First time server.
• 2 - Second time server.
• ip - IP address of an time server (NTP or SNTP).
Default Setting
137.92.140.80
192.43.244.18
Command Mode
Global Configuration
6-28
: Disabled
: Enabled
: Disabled
: none
: Error
: 16