Interface Commands - SMC Networks 2552W-G User Manual

Interface Commands

The commands described in this section configure connection
parameters for the Ethernet port and wireless interface.
Command
General Interface
interface
Ethernet Interface
dns primary-server
dns secondary-server
ip address
ip dhcp
shutdown
show interface ethernet
Wireless Interface
radio-mode
select-antenna-mode
description
ssid-broadcast
Function
Enters specified interface
configuration mode
Specifies the primary name
server
Specifies the secondary
name server
Sets the IP address for the
Ethernet interface
Submits a DHCP request for
an IP address
Disables the Ethernet
interface
Shows the status for the
Ethernet interface
Sets the radio working mode IC-W
Selects built-in antennas or
optional high-gain antenna
Adds a description to the
wireless interface
Opens access to clients
without a pre-configured
SSID
Interface Commands
Mode Page
GC
IC-E
IC-E
IC-E
IC-E
IC-E
Exec
IC-W
IC-W
IC-W
6-68
6-68
6-68
6-69
6-71
6-72
6-72
6-73
6-74
6-73
6-75
6-65