Table of Contents
Advertisement
Command Line Interface
copy
This command copies a boot file, code image, or configuration file
between the access point's flash memory and a FTP/TFTP
server. When you save the configuration settings to a file on a
FTP/TFTP server, that file can later be downloaded to the access
point to restore system operation. The success of the file transfer
depends on the accessibility of the FTP/TFTP server and the
quality of the network connection.
Syntax
copy <ftp | tftp> file
copy config <ftp | tftp>
• ftp - Keyword that allows you to copy to/from an FTP server.
• tftp - Keyword that allows you to copy to/from a TFTP
server.
• file - Keyword that allows you to copy to/from a flash
memory file.
• config - Keyword that allows you to upload the configuration
file from flash memory.
Default Setting
None
Command Mode
Exec
Command Usage
• The system prompts for data required to complete the copy
command.
• Only a configuration file can be uploaded to an FTP/TFTP
server, but every type of file can be downloaded to the
access point.
• The destination file name should not contain slashes (\ or /),
the leading letter of the file name should not be a period (.),
and the maximum length for file names on the FTP/TFTP
6-42
Advertisement
Table of Contents
