System Configuration
System Identification
The system information parameters for the SMC2552W-G can be
left at their default settings. However, modifying these parameters
can help you to more easily distinguish different devices in your
network.
You should set a Service Set Identification (SSID) to identify the
wireless network service provided by the SMC2552W-G. Only
clients with the same SSID can associate with the access point.
System Name – An alias for the access point, enabling the device
to be uniquely identified on the network. (Default: Enterprise AP;
Range: 1-22 characters)
SSID – The name of the basic service set provided by the access
point. Clients that want to connect to the network through the
access point must set their SSID to the same as that of the
access point. (Default: SMC; Range: 1-32 characters, case
sensitive)
5-4