Command Line Interface
password
After initially logging onto the system, you should set the
password. Remember to record it in a safe place. Use the no
form to reset the default password.
Syntax
password password
no password
password - Password for management access.
(Length: 3-16 characters, case sensitive)
Default Setting
smcadmin
Command Mode
Global Configuration
Example
SMC-AP(config)#password smc
SMC-AP(config)#
ip http port
This command specifies the TCP port number used by the web
browser interface. Use the no form to use the default port.
Syntax
ip http port port-number
no ip http port
port-number - The TCP port to be used by the browser
interface. (Range: 1024-65535)
Default Setting
80
6-22