Table of Contents
Advertisement
System Configuration
CLI Commands for WEP Shared Key Security – From the
802.11g interface configuration mode, use the authentication
command to enable WEP shared-key authentication and the
encryption command to enable WEP encryption. Use the
multicast-cipher command to select WEP cipher type. To enter
WEP keys, use the key command, and then set one key as the
transmit key using the transmit-key command. Then disable
802.1x port authentication with the 802.1x command. To view the
current security settings, use the show interface wireless g
command.
SMC-AP(config)#interface wireless g
Enter Wireless configuration commands, one per line.
SMC-AP(if-wireless g)#authentication shared
SMC-AP(if-wireless g)#encryption 128
SMC-AP(if-wireless g)#multicast-cipher wep
SMC-AP(if-wireless g)#key 1 128 ascii abcdeabcdeabc
SMC-AP(if-wireless g)#transmit-key 1
SMC-AP(if-wireless g)#end
SMC-AP(config)#no 802.1x
SMC-AP(config)#end
SMC-AP#show interface wireless g
Wireless Interface 802.11g Information
==========================================================
----------------Identification----------------------------
Description
SSID
Channel
Status
----------------802.11 Parameters-------------------------
Transmit Power
Max Station Data Rate
Fragmentation Threshold
RTS Threshold
Beacon Interval
DTIM Interval
Maximum Association
5-52
: Enterprise 802.11g Access Point
: r&d
: 11 (AUTO)
: Enable
: HALF (10 dBm)
: 54Mbps
: 2346 bytes
: 2347 bytes
: 100 TUs
: 2 beacons
: 32 stations
6-68
6-82
6-83
6-88
6-84
6-85
6-51
6-95
Advertisement
Table of Contents
