End; Exit - SMC Networks 2552W-G User Manual

Command Line Interface

end

This command returns to the previous configuration mode.
Default Setting
None
Command Mode
Global Configuration, Interface Configuration
Example
This example shows how to return to the Configuration mode
from the Interface Configuration mode:
SMC-AP(if-ethernet)#end
SMC-AP(config)#

exit

This command returns to the Exec mode or exits the
configuration program.
Default Setting
None
Command Mode
Any
Example
This example shows how to return to the Exec mode from the
Interface Configuration mode, and then quit the CLI session:
SMC-AP(if-ethernet)#exit
SMC-AP#exit
CLI session with the Access Point is now closed
Username:
6-12