Radius-Server Timeout - SMC Networks 2552W-G User Manual

Command Line Interface
Default Setting
3
Command Mode
Global Configuration
Example
SMC-AP(config)#radius-server retransmit 5
SMC-AP(config)#

radius-server timeout

This command sets the interval between transmitting
authentication requests to the RADIUS server.
Syntax
radius-server [secondary] timeout number_of_seconds
• secondary - Secondary server.
• number_of_seconds - Number of seconds the access point
waits for a reply before resending a request. (Range: 1-60)
Default Setting
5
Command Mode
Global Configuration
Example
SMC-AP(config)#radius-server timeout 10
SMC-AP(config)#
6-48