•
WEP keys do not match: When the access point uses "Shared
Key Authentication," but the key used by client and access
point are not the same, the frame will be decrypted incorrectly,
using the wrong algorithm and sequence number.
CLI Commands for Displaying the Event Logs – From the global
configuration mode, use the show logging command.
SMC-AP#show logging
Logging Information
============================================
Syslog State
Logging Host State
Logging Console State
Server Domain name/IP
Logging Level
Logging Facility Type
=============================================
SMC-AP#
Note: Log messages are not displayed in the CLI.
Status Information
: Enabled
: Enabled
: Enabled
: 192.168.1.19
: Alert
: 16
6-27
5-67