SMC Networks 2552W-G User Manual page 139

Command
logging console
logging level
logging
facility-type
show logging
System Clock
sntp-server ip
sntp-server
enable
sntp-server
date-time
sntp-server
daylight-saving
sntp-server
timezone
show sntp
System Status
show system
show version
System Management Commands
Function
Initiates logging of error messages to
the console
Defines the minimum severity level for
event logging
Sets the facility type for remote logging
of syslog messages
Displays the state of logging
Sets the system clock via an NTP/
SNTP server
Specifies one or more time servers
Accepts time from the specified time
servers
Manually sets the system date and
time
Sets the start and end dates for
daylight savings time
Sets the time zone for the access
point's internal clock
Shows current SNTP configuration
settings
Displays system configuration and
version information
Displays system information
Displays version information for the
system
Mode Page
GC 6-25
GC 6-26
GC 6-27
Exec 6-27
GC 6-28
GC 6-29
GC 6-30
GC 6-31
GC 6-32
Exec 6-32
Exec 6-33
Exec 6-34
6-17