SMC Networks 2552W-G User Manual page 25

LED Status
WLAN Off
On Green
Blinking
Green
Security Slot
The access point includes a Kensington security slot on the rear
panel. You can prevent unauthorized removal of the access point
by wrapping the Kensington security cable (not provided) around
an unmovable object, inserting the lock into the slot, and turning
the key.
Console Port
This port is used to connect a console device to the access point
through a serial cable. This connection is described under
"Console Port Pin Assignments" on page B-4. The console device
can be a PC or workstation running a VT-100 terminal emulator,
or a VT-100 terminal.
Ethernet Port
The access point has one 10BASE-T/100BASE-TX RJ-45 port
that can be attached directly to 10BASE-T/100BASE-TX LAN
segments. These segments must conform to the IEEE 802.3 or
802.3u specifications.
This port uses an MDI (i.e., internal straight-through) pin
configuration. You can therefore use straight-through twisted-pair
cable to connect this port to most network interconnection
devices such as a switch or router that provide MDI-X ports.
Hardware Description
Description
Indicates the 802.11b/g radio is
administratively disabled.
The access point is associated with
wireless clients, but there is no network
activity.
Indicates that the access point is
transmitting or receiving data through
wireless links.
1-5