Prestige 653HWI Series User's Guide
2.4.2 Uploading a Configuration File Via Console Port
Download the default configuration file from the ZyXEL FTP site, unzip it and save it in a folder.
Step 1.
Turn off the Prestige, begin a terminal emulation software session and turn on the Prestige again.
When you see the message "Press Any key to enter Debug Mode within 3 seconds", press any
key to enter debug mode.
Step 2.
Enter "atlc" after "Enter Debug Mode" message.
Step 3.
Wait for "Starting XMODEM upload" message before activating Xmodem upload on your
terminal. This is an example Xmodem configuration upload using HyperTerminal.
Step 4.
Click Transfer, then Send File to display the following screen.
Step 5.
After successful firmware upload, enter "atgo" to restart the router.
2-4
Figure 2-3 Example Xmodem Upload
Type the configuration file's
location, or click Browse to
search for it.
Choose the Xmodem
protocol.
Then click Send.
Introducing the Web Configurator