Table of Contents
Advertisement
Prestige 653HWI Series User's Guide
Step 2.
Move the cursor to the Edit IP/Bridge field, press [SPACE BAR] to select Yes, then press
[ENTER] to display Menu 11.3 – Remote Node Network Layer Options.
IP Options:
IP Address Assignment= Dynamic
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= Full Feature
Metric= 2
Private= No
RIP Direction= None
Multicast= None
IP Policies= 3,4,5,6
Press ENTER to Confirm or ESC to Cancel:
Figure 29-3 Menu 11.3 Remote Node Network Layer Options
The next table explains fields in Menu 11.3
Table 29-2 Menu 11.3 Remote Node Network Layer Options
FIELD
IP Address
Press [SPACE BAR] and then [ENTER] to select Dynamic if the remote
Assignment
node is using a dynamically assigned IP address or Static if it is using a
static (fixed) IP address. You will only be able to configure this in the ISP
node (also the one you configure in menu 4),all other nodes are set to
Static.
Rem IP Addr
This is the IP address you entered in the previous menu.
Rem Subnet
Type the subnet mask assigned to the remote node.
Mask
My WAN
Some implementations, especially UNIX derivatives, require separate IP
Addr
network numbers for the WAN and LAN links and each end to have a
unique address within the WAN network number. In that case, type the IP
address assigned to the WAN port of your Prestige.
NOTE: Refers to local Prestige address, not the remote router address.
NAT
Press [SPACE BAR] and then [ENTER] to select Full Feature if you have
multiple public WAN IP addresses for your Prestige.
29-6
Menu 11.3 - Remote Node Network Layer Options
Address Mapping Set= 2
Version= RIP-1
Bridge Options:
Ethernet Addr Timeout (min)= N/A
Remote Node Network Layer Options.
–
DESCRIPTION
EXAMPLE
Dynamic
SUA Only
Remote Node Profile
Advertisement
Table of Contents
