Figure 24-1 Menu 1 General Setup; Table 24-1 Menu 1 General Setup - ZyXEL Communications PRESTIGE 653HX User Manual

Prestige 653HWI Series User's Guide
Step 2. Fill in the required fields. Refer to the table shown next for more information about these fields.
FIELD
System Name
Location (optional)
Contact Person's
Name (optional)
Domain Name
Edit Dynamic DNS
Route IP
Bridge
24-2
Menu 1 - General Setup
System Name= ?
Location=
Contact Person's Name=
Domain Name=
Edit Dynamic DNS= No
Route IP= Yes
Bridge= No
Press ENTER to Confirm or ESC to Cancel:

Figure 24-1 Menu 1 General Setup

Table 24-1 Menu 1 General Setup

Choose a descriptive name for identification purposes. This name can
be up to 30 alphanumeric characters long. Spaces are not allowed, but
dashes "-" and underscores "_" are accepted.
Enter the geographic location (up to 31 characters) of your Prestige.
Enter the name (up to 30 characters) of the person in charge of this
Prestige.
Enter the domain name (if you know it) here. If you leave this field
blank, the ISP may assign a domain name via DHCP. You can go to
menu 24.8 and type "sys domainname" to see the current domain
name used by your gateway.
If you want to clear this field just press the [SPACE BAR]. The domain
name entered by you is given priority over the ISP assigned domain
name.
Press the [SPACE BAR] to select Yes or No (default). Select Yes to
configure Menu 1.1 — Configure Dynamic DNS (discussed next).
Set this field to Yes to enable or No to disable IP routing. You must
enable IP routing for Internet access.
Turn on/off bridging for protocols not supported (for example, SNA) or
not turned on in the previous Route IP field. Select Yes to turn
bridging on; select No to turn bridging off.
DESCRIPTION EXAMPLE
P653
MyHouse
JohnDoe
zyxel.com.tw
No
Yes
No
Menu 1 General Setup