ZyXEL Communications PRESTIGE 653HX User Manual page 104

Prestige 653HWI Series User's Guide
ISDN Connection Setup
Table 7-3
LABEL
Nailed-Up
Connection
Connect on Demand
Max Idle Timeout
Budget
Allocate Budget
Period
Back
Apply
Cancel
7-12
DESCRIPTION
Select Nailed-Up Connection when you want your connection up all the time. The
Prestige will try to bring up the connection automatically if it is disconnected.
Select Connect on Demand when you don't want the connection up all the time
and specify an idle time-out in the Max Idle Timeout field.
Specify an idle time-out in the Max Idle Timeout field when you select Connect
on Demand. The default setting is 0, which means the Internet session will not
timeout.
Type the amount of time (in minutes) that the dial backup connection can be used
during the time configured in the Period field. Set an amount that is less than the
time period configured in the Period field. If you set the Allocated Budget to 0,
you will not be able to use the dial backup connection.
Type the time period (in hours) for how often the budget should be reset. For
example, to allow calls to this remote node for a maximum of 10 minutes every
hour, set the Allocated Budget to 10 (minutes) and the Period to 1 (hour). If you
set the Period to 0, there is no budget control and the Prestige uses the
Connection settings.
Click Back to return to the previous screen.
Click Apply to save the changes and return to the previous screen.
Click Cancel to begin configuring this screen afresh.
WAN Setup