Table of Contents
Advertisement
The following table describes the fields in this screen.
LABEL
Service Name
Type the name of your PPPoE service here.
User Name
Enter the user name exactly as your ISP assigned. If assigned a name in the form
user@domain
as given.
Password
Enter the password associated with the user name above.
IP Address
A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not fixed;
the ISP assigns you a different one each time you connect to the Internet. The Single User
Account feature can be used with either a dynamic or static IP address.
Select Obtain an IP Address Automatically if you have a dynamic IP address; otherwise
select Static IP Address and type your ISP assigned IP address in the IP Address text box
below.
Connection
Select Connect on Demand when you don't want the connection up all the time and specify
an idle time-out (in seconds) in the Max. Idle Timeout field. The default setting selects
Connection on Demand with 0 as the idle time-out, which means the Internet session will
not timeout.
Select Nailed-Up Connection when you want your connection up all the time. The Prestige
will try to bring up the connection automatically if it is disconnected.
The schedule rule(s) in SMT menu 26 has priority over your Connection settings.
Network
Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the NAT
Address
chapter for more details.
Translation
Back
Click Back to go back to the first wizard screen.
Next
Click Next to continue to the next wizard screen.
Wizard Setup
Table 3-2 Internet Connection with PPPoE
where domain identifies a service name, then enter both components exactly
Prestige 653HWI Series User's Guide
DESCRIPTION
3-7
Advertisement
Table of Contents
