ZyXEL Communications PRESTIGE 653HX User Manual page 201

LABEL
Content
My IP Address
Peer ID Type
Content
Secure Gateway IP
Address
Encapsulation Mode Select Tunnel mode or Transport mode from the drop-down list box.
VPN Screens
Table 17-7 VPN IKE
When you select IP in the Local ID Type field, type the IP address of your
computer or leave the field blank to have the Prestige automatically use its own IP
address.
When you select DNS in the Local ID Type field, type a domain name (up to 31
characters) by which to identify this Prestige.
When you select E-mail in the Local ID Type field, type an e-mail address (up to
31 characters) by which to identify this Prestige.
The domain name or e-mail address that you use in the Content field is used for
identification purposes only and does not need to be a real domain name or e-mail
address.
Enter the WAN IP address of your Prestige. The Prestige uses its current WAN IP
address (static or dynamic) in setting up the VPN tunnel if you leave this field as
0.0.0.0. The VPN tunnel has to be rebuilt if this IP address changes.
Select IP to identify the remote IPSec router by its IP address.
Select DNS to identify the remote IPSec router by a domain name.
Select E-mail to identify the remote IPSec router by an e-mail address.
When you select IP in the Peer ID Type field, type the IP address of the computer
with which you will make the VPN connection or leave the field blank to have the
Prestige automatically use the address in the Secure Gateway IP Address field.
When you select DNS in the Peer ID Type field, type a domain name (up to 31
characters) by which to identify the remote IPSec router.
When you select E-mail in the Peer ID Type field, type an e-mail address (up to
31 characters) by which to identify the remote IPSec router.
The domain name or e-mail address that you use in the Content field is used for
identification purposes only and does not need to be a real domain name or e-mail
address. The domain name also does not have to match the remote router's IP
address or what you configure in the Secure Gateway IP Address field.
Type the WAN IP address or the URL (up to 31 characters) of the IPSec router
with which you're making the VPN connection. Set this field to 0.0.0.0 if the remote
IPSec router has a dynamic WAN IP address (the IPSec Key Mode field must be
set to IKE).
Prestige 653HWI Series User's Guide
DESCRIPTION
17-11