Chapter 42 Call Scheduling; Introduction; Figure 42-1 Menu 26 Schedule Setup - ZyXEL Communications PRESTIGE 653HX User Manual

Call scheduling (applicable for PPPoA or PPPoE encapsulation only) allows you to dictate when a

42.1 Introduction

The call scheduling feature allows the Prestige to manage a remote node and dictate when a remote node
should be called and for how long. This feature is similar to the scheduler in a videocassette recorder (you
can specify a time period for the VCR to record). You can apply up to 4 schedule sets in Menu 11.1 —
Remote Node Profile. From the main menu, enter 26 to access Menu 26 — Schedule Setup as shown
next.
Schedule
Set #
------
Lower numbered sets take precedence over higher numbered sets thereby avoiding scheduling conflicts. For
example, if sets 1, 2 ,3 and 4 in are applied in the remote node then set 1 will take precedence over set 2, 3
and 4 as the Prestige, by default, applies the lowest numbered set first. Set 2 will take precedence over set 3
and 4, and so on.
You can design up to 12 schedule sets but you can only apply up to four schedule sets for a remote node.
Call Scheduling
Menu 26 - Schedule Setup
Name
-----------------
1 ______________
2 ______________
3 ______________
4 ______________
5 ______________
6 ______________
Enter Schedule Set Number to Configure=
Edit Name=
Press ENTER to Confirm or ESC to Cancel:

Figure 42-1 Menu 26 Schedule Setup

Prestige 653HWI Series User's Guide
Call Scheduling
remote node should be called and for how long.
Schedule
Set #
------ ------------------
7 ______________
8 ______________
9 ______________
10 ______________
11 ______________
12 ______________
Chapter 42
Name
42-1