Figure 32-1 Menu 4 Applying Nat For Internet Access - ZyXEL Communications PRESTIGE 653HX User Manual

Prestige 653HWI Series User's Guide
The following figure shows how you apply NAT to the remote node in menu 11.1.
Step 1.
Enter 11 from the main menu.
Step 2. When menu 11 appears, as shown in the following figure, type the number of the remote node
that you want to configure.
Step 3. Move the cursor to the Edit IP/Bridge field, press [SPACE BAR] to select Yes and then press
[ENTER] to bring up Menu 11.3 - Remote Node Network Layer Options.
32-2
Menu 4 - Internet Access Setup
ISP's Name= MyISP
Encapsulation= RFC 1483
Multiplexing= LLC-based
VPI #= 8
VCI #= 35
Service Name= N/A
My Login= N/A
My Password= N/A
NAT= SUA Only
Address Mapping Set= N/A
IP Address Assignment= Static
IP Address= 0.0.0.0
ENET ENCAP Gateway= N/A
Press ENTER to Confirm or ESC to Cancel:

Figure 32-1 Menu 4 Applying NAT for Internet Access

NAT