The following table describes the fields in this screen.
LABEL
Mode
From the Mode drop-down list box, select Routing (default) if your ISP allows multiple
computers to share an Internet account. Otherwise select Bridge.
Encapsulation
Select the encapsulation type your ISP uses from the Encapsulation drop-down list box.
Choices vary depending on what you select in the Mode field.
If you select Bridge in the Mode field, select either PPPoA or RFC 1483.
If you select Routing in the Mode field, select PPPoA, RFC 1483, ENET ENCAP or PPPoE.
Multiplex
Select the multiplexing method used by your ISP from the Multiplex drop-down list box either
VC-based or LLC-based.
Virtual Circuit
VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) define a virtual circuit. Refer to
ID
the appendix for more information.
VPI
Enter the VPI assigned to you. This field may already be configured.
VCI
Enter the VCI assigned to you. This field may already be configured.
Wizard Setup
Figure 3-1 Wizard Screen 1
Table 3-1 Wizard Screen 1
DESCRIPTION
Prestige 653HWI Series User's Guide
3-3