Table of Contents
Advertisement
The following table describes the fields in this screen.
ISDN Connection Setup
Table 7-3
LABEL
Basic
ISDN Phone Number
Outside Line Prefix
Outgoing
Username
Password
Primary Phone
Number
Secondary Phone
Number
IP Address
Obtain and IP
Address
Automatically
Static IP Address
IP Address
Network Address
Translation
Dial out Channel Setting
Multilink
Connection
WAN Setup
DESCRIPTION
The number of your ISDN line.
A PABX (Private Automatic Branch eXchange) generally requires you to dial a
number (a single digit in most cases) when you need an outside line. If your router
is connected to a PABX enter this number in Outside Line Prefix, otherwise leave
it blank.
Enter the login name given to you by your ISP.
Enter the password associated with the login name above.
Enter the primary and the secondary phone numbers to connect to the ISP.
Some implementations, especially the UNIX derivatives, require the WAN link to
have a separate IP network number from the LAN and each end must have a
unique address within the WAN network number. If this is the case, select this
option.
Select this option to assign a static IP address to your router's WAN port.
Enter the IP address in dotted decimal notation (i.e. 0.0.0.0).
Choose from None, Full Feature or SUA Only. When you select Full Feature you
must configure at least one address mapping set. See the chapter on NAT for a
full discussion of this new feature.
The router uses the PPP Multilink Protocol (PPP/MP) to bundle multiple links in a
single connection to boost the effective throughput between two nodes. This
option is only available if the transfer type is 64K. Options for this field are: Off,
BOD and Always.
Prestige 653HWI Series User's Guide
7-11
Advertisement
Table of Contents
