Table of Contents
Advertisement
Prestige 653HWI Series User's Guide
Chapter 30
Static Route Setup
This chapter shows how to setup IP static routes.
30.1 IP Static Route Overview
Static routes tell the Prestige routing information that it cannot learn automatically through other means.
This can arise in cases where RIP is disabled on the LAN or a remote network is beyond the one that is
directly connected to a remote node.
Each remote node specifies only the network to which the gateway is directly connected and the Prestige
has no knowledge of the networks beyond. For instance, the Prestige knows about network N2 in the
following figure through remote node Router 1. However, the Prestige is unable to route a packet to
network N3 because it does not know that there is a route through remote node Router 1 (via Router 2).
The static routes allow you to tell the Prestige about the networks beyond the remote nodes.
Figure 30-1 Sample Static Routing Topology
Static Route Setup
30-1
Advertisement
Table of Contents
