Navigating The Zywall Web Configurator; Figure 2-3 Example Xmodem Upload - ZyXEL Communications ZyWALL 5 User Manual

Enter "y" at the prompt below to go into debug mode.
3.
Enter "atlc" after "Enter Debug Mode" message.
4.
Wait for "Starting XMODEM upload" message before activating Xmodem upload on your terminal.
5.
This is an example Xmodem configuration upload using HyperTerminal.
Click Transfer, then Send File to display the following screen.
6.
After successful firmware upload, enter "atgo" to restart the router.
7.
2.4

Navigating the ZyWALL Web Configurator

The following summarizes how to navigate the web configurator from the HOME screen.
Follow the instructions you see in the HOME screen or click the
online help.
The screen varies according to the device mode you select in the MAINTENANCE Device Mode
screen.
2.4.1 Router Mode
The following screen displays when the ZyWALL is set to router mode. The ZyWALL is set to router
mode by default.
Introducing the Web Configurator

Figure 2-3 Example Xmodem Upload

icon (located in the top right corner of most screens) to view
ZyWALL 5 Internet Security Appliance
Type the configuration file's
location, or click Browse to
search for it.
Choose the Xmodem
protocol.
Then click Send.
2-3