Table of Contents
Advertisement
Prestige 653HWI Series User's Guide
For incoming packets, your Prestige applies data filters only. Packets are processed depending on whether a
match is found. The following sections describe how to configure filter sets.
The Filter Structure of the Prestige
A filter set consists of one or more filter rules. Usually, you would group related rules, for example, all the
rules for NetBIOS, into a single set and give it a descriptive name. You can configure up to twelve filter
sets with six rules in each set, for a total of 72 filter rules in the system.
34.2 Configuring a Filter Set for the Prestige
To configure a filter set, follow the steps shown next.
Step 1.
Enter 21 in the main menu to display Menu 21 – Filter and Firewall Setup.
Step 2.
Enter 1 to display Menu 21.1 – Filter Set Configuration as shown next.
Filter
Set #
------
1
2
3
4
5
6
Step 3.
Type the filter set to configure (no. 1 to 12) and press [ENTER]
Step 4.
Type a descriptive name or comment in the Edit Comments field and press [ENTER].
Step 5.
Press [ENTER] at the message
Rules Summary (that is, if you selected filter set 1 in menu 21.1).
34-4
Menu 21.1 - Filter Set Configuration
Comments
-----------------
_______________
NetBIOS_WAN
NetBIOS_LAN
IGMP
_______________
_______________
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel:
Figure 34-3 Menu 21 Filter Set Configuration
Press ENTER to confirm..." to display Menu 21.1.1 – Filter
"
Filter
Set #
Comments
------
-----------------
7
_______________
8
_______________
9
_______________
10
_______________
11
_______________
12
_______________
.
Filter Configuration
Advertisement
Table of Contents
