Table of Contents
Advertisement
Prestige 653HWI Series User's Guide
Denies all sessions originating from the WAN to the LAN.
User A initiates a telnet session.
The previous figure shows the Prestige's default firewall rules in action as well as demonstrates how stateful
inspection works. User A can initiate a Telnet session from within the LAN and responses to this request are
allowed. However other Telnet traffic initiated from the WAN is blocked.
11.5.1 Stateful Inspection Process
In this example, the following sequence of events occurs when a TCP packet leaves the LAN network
through the firewall's WAN interface. The TCP packet is the first in a session, and the packet's application
layer protocol is configured for a firewall rule inspection:
1. The packet travels from the firewall's LAN to the WAN.
2. The packet is evaluated against the interface's existing outbound access list, and the packet is
permitted (a denied packet would simply be dropped at this point).
3. The packet is inspected by a firewall rule to determine and record information about the state of the
packet's connection. This information is recorded in a new state table entry created for the new
connection. If there is not a firewall rule for this packet and it is not an attack, then The default
action for packets not matching following rules field (see Figure 13-3) determines the action for
this packet.
11-8
Return traffic for User A's telnet session is permitted.
Figure 11-5 Stateful Inspection
Other Telnet traffic is blocked.
Firewalls
Advertisement
Table of Contents
