Table of Contents
Advertisement
Prestige 653HWI Series User's Guide
FIELD
IP Alias
Choose Yes to configure the LAN network for the Prestige.
IP Address
Enter the IP address of your Prestige in dotted decimal notation
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on
the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige
RIP Direction
Press [
Both, In Only or Out Only.
Version
Press [
RIP-2B or RIP-2M.
Incoming
Enter the filter set(s) you wish to apply to the incoming traffic
Protocol Filters
between this node and the Prestige.
Outgoing
Enter the filter set(s) you wish to apply to the outgoing traffic between
Protocol Filters
this node and the Prestige.
When you have completed this menu, press [
save your configuration, or press [
28.5 Route IP Setup
The first step is to enable the IP routing in Menu 1 — General Setup.
To edit menu 1, type in 1 in the main menu and press [ENTER]. Set the Route IP field to Yes by pressing
[SPACE BAR].
28-4
Table 28-1 Menu 3.2.1 IP Alias Setup
DESCRIPTION
SPACE BAR
] to select the RIP direction. Choices are None,
SPACE BAR]
to select the RIP version. Choices are RIP-1,
ENTER
ESC
] at any time to cancel.
Menu 1 - General Setup
System Name= P653HWI
Location= location
Contact Person's Name=
Domain Name=
Edit Dynamic DNS= No
Route IP= Yes
Bridge= No
Press ENTER to Confirm or ESC to Cancel:
Figure 28-5 Menu 1 General Setup
] at the prompt "Press ENTER to Confirm..." to
EXAMPLE
Yes
192.168.2.1
255.255.255.0
None
RIP-1
Internet Access
Advertisement
Table of Contents
