Table of Contents
Advertisement
Prestige 653HWI Series User's Guide
Press Space Bar to Toggle.
The following table describes the fields in this menu.
FIELD
Check
Mechanism
Check WAN IP
Address1-3
KeepAlive Fail
Tolerance
25-2
Menu 2 - Wan Backup Setup
Check Mechanism = DSL Link
Check WAN IP Address1 = 0.0.0.0
Check WAN IP Address2 = 0.0.0.0
Check WAN IP Address3 = 0.0.0.0
KeepAlive Fail Tolerance = 0
Recovery Interval(sec) = 0
ICMP Timeout(sec) = 0
Traffic Redirect = No
Dial Backup = No
Press ENTER to Confirm or ESC to Cancel:
Figure 25-1 Menu 2 WAN Backup Setup
Table 25-1 Menu 2 WAN Backup Setup
Press [SPACE BAR] and then press [ENTER] to select the method that the Prestige
uses to check the DSL connection.
Select DSL Link to have the Prestige check the DSL connection's physical layer.
Select ICMP to have the Prestige periodically ping the IP addresses configured in
the Check WAN IP Address fields.
Configure this field to test your Prestige's WAN accessibility. Type the IP address of
a reliable nearby computer (for example, your ISP's DNS server address).
When using a WAN backup connection, the Prestige periodically pings the
addresses configured here and uses the other WAN backup connection (if
configured) if there is no response.
Type the number of times (2 recommended) that your Prestige may ping the IP
addresses configured in the Check WAN IP Address field without getting a
response before switching to a WAN backup connection (or a different WAN backup
connection).
DESCRIPTION
Menu 2 WAN Backup Setup
Advertisement
Table of Contents
