The following table describes the fields in this menu.
FIELD
Active
Press [SPACE BAR] and select Yes (to enable) or No (to disable) dial-backup. The
default is No.
Switch Type
This read only field displays your switch type, DSS-1.
In general, this will be Switch/Switch (default). If you are only using one B channel
B Channel
Usage
(e.g., your router is sharing the ISDN BRI line with another device), then select
Switch/Unused. If your second B channel is a leased line, select Switch/Leased.
Press [SPACE BAR] to toggle through all the options. The options are below.
Switch/Unused
Switch/Switch
Switch/Leased
Leased/Switch
Telephone
Enter the telephone number(s) assigned to your ISDN line by your telephone
Number(s)
company. Some switch types only have one telephone number. Note that the router
only accepts digits; please do not include '–' or spaces in this field. This field should be
IDSN Data
no longer than 25 digits.
Edit Advanced
Advanced Setup features are configured when you select Yes to enter Menu 2.1-ISDN
Setup
Advanced Setup (see ahead). Refer to section 25.5 for Advanced setup information.
Edit NetCAPI
NetCAPI Setup features are configured when you select Yes to enter Menu 2.1-ISDN
Setup
NetCAPI Setup (see ahead). Refer to section 25.6 for NetCAPI setup information.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save
your configuration, or press [ESC] at any time to cancel.
25.5 ISDN Advanced Setup Menus
Select Yes in the Edit Advanced Setup field of Menu 2 – Menu 2 WAN Backup Setup to display Menu
2.2.1 as shown later.
Switch Type
The only switch available with your Prestige is DSS-1.
Menu 2 WAN Backup Setup
Table 25-3 Menu 2 ISDN Dial Backup Setup
Prestige 653HWI Series User's Guide
DESCRIPTION
Leased/Unused
Unused/Leased
Leased/Leased
25-5