2 At the end of the tutorial, click Configuration Genie. 1 Hardware Connections 1 Use a telephone wire to connect your P-661HW-D’s DSL port to a telephone jack or the DSL (or modem) jack on a splitter. 2 Use an Ethernet cable to connect a computer to an ETHERNET port for Internet access.
2 Status Page 1 In your browser, go to http://192.168.1.1. 3 See the User’s Guide for field descriptions of the Status screen. P-661HW-D Series Quick Start Guide 2 Enter the default password user to go directly to the Status screen.
Page 4
OTIST ZyXEL's One-Touch Intelligent Security Technology (OTIST) feature allows you to automatically configure the SSID and WPA-PSK on all OTIST-equipped wireless network devices within range of the P-661HW-D. P-661HW-D Series Quick Start Guide 3 Follow the directions in this screen. It is highly recommended that you change the default password.
You must enable OTIST on the P-661HW-D and all wireless clients within three minutes in any order. To start OTIST on the P-661HW-D, hold in the RESET button (see Section 1) for one to five seconds. Do not hold the RESET button in for too long, as this will reset the P-661HW-D to the factory defaults.
Page 6
P-661HW-D Series Quick Start Guide Viewing Your Product’s Certifications 1 Go to www.zyxel.com. 2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3 Select the certification you wish to view from this page.