Table of Contents
Advertisement
Prestige 653HWI Series User's Guide
The following figure uses sample IP addresses to help you understand the field of My Wan Addr in menu
11.3. Refer to the previous Figure 5-1 LAN and WAN IP Addresses for a brief review of what a WAN IP
is. My WAN Addr indicates the local Prestige WAN IP while Rem IP Addr indicates the peer WAN IP.
10.0.0.0
192.168.1.0
172.16.0.1
172.16.0.2
192.168.1.1
10.0.0.1
10/100MB
Figure 29-4 Sample IP Addresses for a TCP/IP LAN-to-LAN Connection
29.4 Remote Node Filter
Move the cursor to the Edit Filter Sets field in menu 11.1, then press [SPACE BAR] to select Yes. Press
[ENTER] to display Menu 11.5 – Remote Node Filter.
Use Menu 11.5 – Remote Node Filter to specify the filter set(s) to apply to the incoming and outgoing
traffic between this remote node and the Prestige and also to prevent certain packets from triggering calls.
You can specify up to 4 filter sets separated by comma, for example, 1, 5, 9, 12, in each filter field.
29-8
Remote Node Profile
Advertisement
Table of Contents
