Functions Of Patch Parameters; Settings Common To The Entire Patch - Roland Juno-Stage User Manual

Chapter 8. Detailed Editing for Patches

Functions of Patch Parameters

Settings Common to the Entire Patch

GENERAL
Parameter Value
Refer to "Patch List"
Patch Category
(p. 193).
Patch Level 0–127
Patch Pan L64–0–63R
Patch Priority LAST, LOUDEST
Octave Shift
-3–+3
Patch Coarse Tune ★
-48–+48
Patch Fine Tune -50–+50
Stretch Tune Depth OFF, 1–3
Analog Feel 0–127
Stretched Tuning
fig.06-011.e
Pitch difference from
equal temperament
OFF
1
2
3
Low note range
98
Parameters indicated by (
Parameter marked with a "★" can be controlled using specified MIDI messages.
Explanation
Type (category) of the patch
Volume of the patch
Left/right position of the patch
How notes will be managed when the maximum polyphony is exceeded (128 voices)
LAST: The last-played voices will be given priority (Notes will be turned off in order,
beginning with the first-played note.)
LOUDEST: The loudest voices will be given priority (Notes will be turned off, beginning with
the lowest-volume voice.)
Pitch of the patch's sound (in units of an octave)
Pitch of the patch's sound (in semitones, +/- 4 octaves)
Pitch of the patch's sound (in 1-cent steps; one cent is 1/100th of a semitone)
Stretched tuning (a system by which acoustic pianos are normally tuned, causing the lower
range to be lower and the higher range to be higher than the mathematical tuning ratios would
otherwise dictate)
OFF: Equal temperament
1–3: Higher settings will produce the greater difference in the pitch of the low and high
ranges.
Depth of 1/f modulation (a pleasant and naturally-occurring ratio of modulation that occurs in
a babbling brook or rustling wind)
* You can simulate the natural instability characteristic of an analog synthesizer by adding
this "1/f modulation."
Parameter value
3
2
1
OFF
High note range
) can be edited via ZOOM EDIT (p. 94).
ZOOM
(Matrix Control, p. 110)