Roland Juno-Stage User Manual page 187

OVERDRIVE → DELAY
68:
fig.MFX-68
L in
Overdrive
R in
Parameter Value
Overdrive Drive # 0–127
Overdrive Pan # L64–63R
Delay Time 0–2600 msec, note
Delay
-98–+98%
Feedback #
200–8000 Hz,
Delay HF Damp
BYPASS
Delay Balance # D100:0W–D0:100W
Level 0–127
DISTORTION → CHORUS
69:
The parameters are essentially the same as in
"66: OVERDRIVE → CHORUS," with the exception of the following
two.
Overdrive Drive → Distortion Drive,
Overdrive Pan → Distortion Pan
fig.MFX-69
L in
Distortion
R in
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Explanation
Degree of distortion
Also changes the volume.
Stereo location of the overdrive
sound
Adjusts the delay time from the
direct sound until the delay
sound is heard.
Adjusts the proportion of the
delay sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Adjusts the frequency above
which sound fed back to the
effect will be cut. If you do not
want to cut the high frequencies,
set this parameter to BYPASS.
Adjusts the volume balance
between the sound that is sent
through the delay (W) and the
sound that is not sent through the
delay (D).
Output Level
L out
Balance D
Balance W
Chorus
Balance W
R out
Balance D
DISTORTION → FLANGER
70:
The parameters are essentially the same as in
"67: OVERDRIVE → FLANGER," with the exception of the following
two.
Overdrive Drive → Distortion Drive,
Overdrive Pan → Distortion Pan
fig.MFX-70
L in
Distortion
R in
DISTORTION → DELAY
71:
The parameters are essentially the same as in
"68: OVERDRIVE → DELAY," with the exception of the following two.
Overdrive Drive → Distortion Drive,
Overdrive Pan → Distortion Pan
fig.MFX-71
L in
Distortion
R in
ENHANCER → CHORUS
72:
fig.MFX-72
L in
Enhancer
Mix
R in Enhancer
Mix
Parameter Value
Enhancer Sens # 0–127
Enhancer Mix # 0–127
Chorus Pre Delay 0.0–100 msec
0.05–10.00 Hz,
Chorus Rate #
note
Chorus Depth 0–127
D100:0W–
Chorus Balance #
D0:100W
Level 0–127
Effects List
Balance D
L out
Feedback
Balance W
Flanger
Balance W
R out
Balance D
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
L out
Balance D
Balance W
Chorus
Balance W
R out
Balance D
Explanation
Sensitivity of the enhancer
Level of the overtones generated
by the enhancer
Adjusts the delay time from the
direct sound until the chorus sound
is heard.
Frequency of modulation
Depth of modulation
Adjusts the volume balance between
the sound that is sent through the
chorus (W) and the sound that is not
sent through the chorus (D).
Output Level
187