Specifying How Multi-Effects Are Combined (Mfx Structure); Chorus Settings (Chorus); Reverb Settings (Reverb) - Roland Juno-Stage User Manual

Chapter 5. Applying Effects to the Sound

Specifying How Multi-Effects are Combined (MFX STRUCTURE)

Here you can specify how MFX 1–3 will be combined.
This parameter does not exist in Patch mode.
Parameter Range
MFX Structure TYPE01–TYPE16
MFX1–3
00 (THRU)–79

Chorus Settings (CHORUS)

Parameter Range
00:OFF–
(Chorus Type)
03:GM2 CHORUS
Parameters for each Set the parameters of the selected chorus type.
chorus type Refer to "Chorus Parameters" (p. 190).

Reverb Settings (REVERB)

Parameter Range
00:OFF–
(Reverb Type)
05:GM2 REVERB
Parameters for each Set the parameters of the selected reverb type.
reverb type Refer to "Reverb Parameters" (p. 191).
86
fig.
In the MFX screen (p. 84) or MFX CTRL screen (p. 84), press [5 (STRUCT)] to access
the MFX STRUCTURE screen.
Use the cursor buttons to move the cursor to the parameter that you want to edit, and
use the VALUE dial or [DEC] [INC] to set the value.
Explanation
Specifies how MFX 1–3 will be combined
Specifies the multi-effect type for each MFX 1–3
fig.
From the EFFECT ROUTING screen (p. 80, p. 82), press [4 (CHORUS)] to access the
CHORUS screen.
Use the cursor buttons to move the cursor to the parameter that you want to edit, and
use the VALUE dial or [DEC] [INC] to set the value.
Explanation
Selects the type of chorus.
Choose "00: OFF" if you don't want to apply chorus.
From the EFFECT ROUTING screen (p. 80, p. 82), press [5 (REVERB)] to access the
REVERB screen.
Use the cursor buttons to move the cursor to the parameter that you want to edit, and
use the VALUE dial or [DEC] [INC] to set the value.
Explanation
Selects the type of reverb.
Choose "00: OFF" if you don't want to apply reverb.