Roland Juno-Stage User Manual page 104

Chapter 8. Detailed Editing for Patches
WAVE PITCH
Parameter Value
Tone Coarse Tune ★
-48–+48
Tone Fine Tune ★
-50–+50
Rand Pitch Depth 0–1200
Pitch Keyfollow -200–+200
P-Env V-Sens
-63–+63
P-Env T1 V-Sens -63–+63
P-Env T4 V-Sens -63–+63
P-Env Time KF
-100–+100
(Time Keyfollow)
Pitch Keyfollow
Pitch
C1 C2 C3 C4
104
Explanation
Pitch of the tone's sound (in semitones, +/-4 octaves)
Pitch of the tone's sound (in 1-cent steps; one cent is 1/100th of a semitone)
Width of random pitch deviation that will occur each time a key is pressed (in 1-cent steps)
If you do not want the pitch to change randomly, set this to "0."
Amount of pitch change that will occur when you play a key one octave higher
If you want the pitch to rise one octave as on a conventional keyboard, set this to "+100."
If you want the pitch to rise two octaves, set this to "+200."
Keyboard playing dynamics can be used to control the depth of the pitch envelope.
If you want the pitch envelope to have more effect for strongly played notes, set this
parameter to a positive (+) value.
This allows keyboard dynamics to affect the T1 of the Pitch envelope.
If you want T1 to be speeded up for strongly played notes, set this parameter to a positive
(+) value.
Use this parameter when you want key release speed to affect the T4 value of the Pitch
envelope.
If you want T4 to be speeded up for quickly released notes, set this parameter to a positive
(+) value.
Use this setting if you want the pitch envelope times (T2–T4) to be affected by the keyboard
location.
Based on the pitch envelope times for the C4 key, positive (+) settings will cause notes
higher than C4 to have increasingly shorter times.
+200
+100
+50
0
-50
-200 -100
Key
C5 C6 C7
Parameter marked with a "★" can be controlled using specified MIDI messages.
Time Keyfollow
Time
C1 C2 C3 C4
(Matrix Control, p. 110)
-100
-50
0
+50
+100
Key
C5 C6 C7