Roland Juno-Stage User Manual page 107

Parameter Value
Cutoff V-Curve FIX, 1–7
Cutoff V-Sens
-63–+63
Resonance V-Sens
-63–+63
F-Env V-Curve FIX, 1–7
F-Env V-Sens
-63–+63
F-Env T1 V-Sens
-63–+63
F-Env T4 V-Sens -63–+63
TVF ENVELOPE
Parameter Value
F-Env Depth
-63–+63
ZOOM Env Depth
F-Env Time KF
-100–+100
(Time Keyfollow)
F-Env Time 1–4 ★
0–127
Time 1–4
ZOOM
F-Env Level 0–4
0–127
Level 0–4
ZOOM
TVF Envelope
T1 T2
Cutoff
Frequency
L0
L1 L2
Note on
Explanation
Curve that determines how keyboard playing dynamics (velocity) will affect the cutoff frequency
Set this to "FIX" if you don't want the Cutoff frequency to be affected by the keyboard velocity.
1 2
Use this parameter when changing the cutoff frequency to be applied as a result of changes in playing
velocity.
If you want strongly played notes to raise the cutoff frequency, set this parameter to positive (+) settings.
This allows keyboard velocity to modify the amount of Resonance.
If you want strongly played notes to have a greater Resonance effect, set this parameter to positive (+) settings.
Curve that determines how keyboard playing dynamics (velocity) will affect the TVF envelope
Set this to "FIX" if you don't want the TVF Envelope to be affected by the keyboard velocity.
1 2
Specifies how keyboard playing dynamics will affect the depth of the TVF envelope.
Positive (+) settings will cause the TVF envelope to have a greater effect for strongly played notes, and
negative (-) settings will cause the effect to be less.
This allows keyboard dynamics to affect the T1 of the TVF envelope.
If you want T1 to be speeded up for strongly played notes, set this parameter to a positive (+) value.
Use this parameter when you want key release speed to affect the T4 value of the TVF envelope.
If you want T4 to be speeded up for quickly released notes, set this parameter to a positive (+) value.
Explanation
Depth of the TVF envelope
Higher settings will cause the TVF envelope to produce greater change. Negative (-) settings will invert
the shape of the envelope.
Use this setting if you want the TVF envelope times (T2–T4) to be affected by the keyboard location.
Based on the TVF envelope times for the C4 key (center C), positive (+) settings will cause notes higher
than C4 to have increasingly shorter times.
TVF envelope times (T1–T4)
Higher settings will lengthen the time until the next cutoff frequency level is reached.
TVF envelope levels (L0–L4)
Specify how the cutoff frequency will change at each point, relative to the Cutoff Frequency value.
T3 T4
L3 L4
Note off
Chapter 8. Detailed Editing for Patches
3 4 5
3 4 5
Parameters indicated by (
ZOOM
Parameter marked with a "★" can be controlled using specified MIDI messages.
Time Keyfollow
Time
Time
C1 C2 C3
6 7
6 7
) can be edited via ZOOM EDIT (p. 94).
(Matrix Control, p. 110)
-100
-50
0
+50
+100
C4 C5 C6 C7
Key
107