Output Settings (Output); Setting Effects For A Rhythm Set (Effects/Mfx/Mfx Control/Chorus/Reverb) - Roland Juno-Stage User Manual

Roland juno-stage: user guide
Table of Contents

Advertisement

Output Settings (OUTPUT)

Parameter
Value
MFX,
L+R,
Rhythm Out Assign
L, R,
TONE
MFX,
Tone Out Assign
L+R,
L, R
Tone Out Level
0–127
Send Level (Output = MFX)
Tone Chorus Send
0–127
Tone Reverb Send
0–127
Send Level (Output = non MFX)
Tone Chorus Send
0–127
Tone Reverb Send
0–127

Setting Effects for a Rhythm Set (Effects/MFX/MFX Control/Chorus/Reverb)

For details regarding effect settings, refer to the pages shown below.
• "Making Effect Settings" (p. 79)
• "Multi-Effect Settings (MFX 1–3)" (p. 84)
• "Chorus Settings (CHORUS)" (p. 86)
• "Reverb Settings (REVERB)" (p. 86)
Chapter 9. Detailed Settings for a Rhythm Set
Explanation
Specifies for each rhythm set how the direct sound will be output.
MFX: Output in stereo through multi-effects. You can also apply chorus or reverb to the sound
that passes through multi-effects.
L+R: Output in stereo to the OUTPUT jacks without passing through the multi-effect
L: Output in mono to the OUTPUT L jack without passing through the multi-effect
R: Output in mono to the OUTPUT R jack without passing through the multi-effect
TONE: Outputs according to the settings for each rhythm tone.
Specifies how the direct sound of each rhythm tone will be output.
MFX: Output in stereo through multi-effects. You can also apply chorus or reverb to the sound
that passes through multi-effects.
L+R: Output in stereo to the OUTPUT jacks without passing through the multi-effect
L: Output in mono to the OUTPUT L jack without passing through the multi-effect
R: Output in mono to the OUTPUT R jack without passing through the multi-effect
* If the Rhythm Out Assign is set to anything other than "TONE," these settings will be ignored.
* Sounds are output to chorus and reverb in mono at all times.
* The output destination of the signal after passing through the chorus is set with the Chorus
Output Select parameters (p. 81).
Level of the signal that is sent to the output destination specified by Tone Out Assign
Level of the signal sent to chorus for each rhythm tone if the tone is sent through MFX
Level of the signal sent to reverb for each rhythm tone if the tone is sent through MFX
Level of the signal sent to chorus for each rhythm tone if the tone is not sent through MFX
Level of the signal sent to reverb for each rhythm tone if the tone is not sent through MFX
131

Advertisement

Table of Contents
loading

Table of Contents