Roland Juno-Stage User Manual page 137

Roland juno-stage: user guide

Table of Contents

[5 (DB EXP)]

Refer to the system setting "[4 (ATV EXP)]" (p. 153).

[6 (DB SYN)]

Refer to the system setting "[3 (SYNTH)]" (p. 152).

CONTROL SW (PERF) Screen

[2 (CTRL SW)]

For each patch assigned to a part, you can specify whether certain MIDI messages will be transmitted (on) or not (off).

Parameter

Value

P.B

Mod

Hold

Ctrl

OFF, ON (✔)

D Beam

[3 (EXT)]

Specifies the MIDI message that will be transmitted for each part.

Parameter

Value

Bank Sel (MSB)

0–127, OFF

Bank Sel (LSB)

0–127

Prog

1–128, OFF

Level

0–127, OFF

Pan

L64–0–63R, OFF

Chapter 10. Detailed Editing for Performances

fig.disp-ctrlsw.eps

In the CTRL SETTING (PERF) screen, press [7 (CTRL SW)] to access this screen.

Use the cursor buttons to select the parameter that you want to edit, and use the

VALUE dial or [DEC] [INC] to set the value.

When you've finished editing, press [7 (EXIT)]. You will return to the CTRL

SETTING (PERF) screen.

Explanation

MIDI pitch bend message transmission on/off

MIDI modulation message transmission on/off

Transmission on/off for the control messages from a pedal connected to the HOLD PEDAL jack

Transmission on/off for the control messages from a pedal connected to the CONTROL PEDAL

jack

Transmission on/off for the control messages from the [S1] button

Transmission on/off for the control messages from the [S2] button

Transmission on/off for the control messages from the D Beam

Explanation

The MSB (control number 0) of the bank select number transmitted when you switch

performances.

Choose "OFF" if you don't want to transmit this message.