Changing The Pitch In Semitone Steps ([Transpose]) - Roland Juno-Stage User Manual

QUICK START
Selecting Sounds

Changing the Pitch in Semitone Steps ([TRANSPOSE])

The transpose function lets you change the pitch of the keyboard in semitone steps.
You can use this when you need to perform a transposing instrument such as trumpet or clarinet at the pitches
printed in the musical score.
fig.panel-trans.eps
fig.disp-trans.eps
While holding down [TRANSPOSE], press [-] or [+].
Specify the amount of transposition in semitone steps
(G–F#: -5–+6 semitones).
A setting window will open when you press the button,
and will close a short time after you release the button.
If the transposition value is other than "C," the
[TRANSPOSE] will light.
34