Specifying The Usb Driver; Using Juno-Stage Editor/Librarian/Playlist Editor; Installing Juno-Stage Editor/Librarian/Playlist Editor In Your Computer - Roland Juno-Stage User Manual

Specifying the USB Driver

Here's how to specify the USB driver that will be used when the
JUNO-STAGE is connected to your computer via the USB MIDI
connector.
If you want to change this setting, disconnect the USB cable
before doing so.
1. Press [MENU].
2. Use [ ] [ ] to select "1. System" and press the [ENTER].
3. Press [2 (GENERAL)].
4. Press [2 (COMMON)].
5. Use the cursor buttons to move the cursor to "USB Driver."
Use the VALUE dial or [DEC] [INC] to specify the driver.
6.
Parameter Value
VENDER
USB Driver
GENERIC
A confirmation message will appear.
Press [7 (CLOSE)] to return to the previous screen.
7. Press the [7 (WRITE)] button.
Turn the power off, then on again.
8.
If you change the "USB Driver" setting, you must turn the power
off, then on again to ensure that the JUNO-STAGE will operate
correctly.
Chapter 7. Connecting an External MIDI Device
Explanation
Choose this if you want to use a
USB driver from the included
CD-ROM or a USB driver
downloaded from the Roland
website.
Choose this if you want to use
the generic USB driver provided
by your computer's operating
system.
Using JUNO-STAGE Editor/
Librarian/Playlist Editor
The included JUNO-STAGE Editor/Librarian/Playlist Editor software
will help you enjoy the full potential of the JUNO-STAGE.
JUNO-STAGE Editor lets you use your computer to edit the JUNO-
STAGE's sounds and other settings. Parameters can be assigned to
sliders and knobs in the screen of your computer, allowing you to edit
efficiently in a graphical manner.
JUNO-STAGE Librarian is software that lets you manage the JUNO-
STAGE's parameters as a library on your computer, allowing efficient
management of patches, rhythm sets, and performances.
Playlist Editor is software that lets you create playlists for the Song
Player (p. 68).
Installing JUNO-STAGE Editor/Librarian/
Playlist Editor in Your Computer
Carefully read the Readme file in the "JUNO-STAGE Editor CD" CD-
ROM included with the JUNO-STAGE, and install JUNO-STAGE
Editor/Librarian/Playlist Editor as directed.
Windows Users
Refer to "Readme_E.txt" on the "JUNO-STAGE Editor CD" CD-ROM
Macintosh Users
Refer to "Readme_E.txt" on the "JUNO-STAGE Editor CD" CD-ROM
Making Connections
1. Set the USB driver selection to "VENDER."
Refer to "Specifying the USB Driver" (p. 93).
2. Use a USB cable (sold separately) to connect the JUNO-STAGE to
your computer.
Refer to the connection example (p. 92).
93