Editing A Rhythm Pattern - Roland Juno-Stage User Manual

Roland juno-stage: user guide
Table of Contents

Advertisement

Editing a Rhythm Pattern

RHYTHM PATTERN Screen
fig.disp-r-ptn.eps
From the RHYTHM GROUP screen, hold down [SHIFT] and press [3
(RHY PTN)] to access the RHYTHM PATTERN screen.
Use the cursor buttons to move the cursor to the parameter you want to
edit, and use the VALUE dial or [DEC] [INC] to edit its value.
The [2]–[7] buttons located below the display will execute the
functions shown in the bottom line of the screen.
Press [2 (RHY GRP)] or [EXIT] to return to the RHYTHM GROUP screen.
Parameter
Values
Explanation
U001–256
(Rhythm
(user),
This selects the rhythm's basic playing
Pattern)
P001–256
style
(preset)
This specifies the time signature of the
rhythm pattern and the amount of "shuffle"
1/4,
1/8,
1/8L,
1/8H,
Grid
1/12,
1/16,
1/16L,
1/16H,
1/24
This specifies the note value
considered as "one grid section," and
the amount of "shuffle" (none, weak,
or strong)
1/4: Quarter note
(one grid section = one beat)
1/8: Eighth note
(two grid sections = one beat)
1/8L: Eighth note shuffle Light
(two grid sections = one beat, with a
light shuffle)
1/8H: Eighth note shuffle Heavy
(two grid sections = one beat, with a
heavy shuffle)
1/12: Eighth note triplet
(three grid sections = one beat)
1/16: Sixteenth note
(four grid sections = one beat)
1/16L: Sixteenth note shuffle Light
(four grid sections = one beat, with a
light shuffle)
1/16H: Sixteenth note shuffle Heavy
(four grid sections = one beat, with a
heavy shuffle)
1/24: Sixteenth note triplet
(six grid sections = one beat)
* The Grid setting is shared with the
arpeggio setting (p. 61).
Chapter 4. Using the Song Player
Parameter
Values
Explanation
This specifies the duration of each note in
the rhythm pattern.
30–120%,
Duration
Full
This specifies the loudness of the notes in
Velocity
1–127
the rhythm pattern.
This specifies the strength of the accents in
the rhythm pattern.
Accent
0–100
Function Button Operations
Function Button
Content
[2 (RHY GRP)]
Displays the RHYTHM GROUP screen (p. 77).
[3 (RHY PTN)]
(The current page)
Each time you press this button, the check mark
will be added or removed. When you add a
[5 (PREVU)]
check mark, the selected rhythm pattern will
play.
Allows you to edit a rhythm pattern.
[6 (PTN EDIT)]
➝ RHYTHM PATTERN EDIT screen (p. 76)
[7 (WRITE)]
Saves the rhythm pattern (p. 78).
You can specify whether each note
will have a short duration for a
staccato feel, or an extended duration
for a tenuto feel.
30–120: For example, if you set this
to "30," the duration of a note in the
grid (or if notes in the grid are
connected by a tie, the duration of
the last note) will be 30% of the note
value specified by the grid type.
Full: Even if consecutive grid
sections are not connected by a tie,
the note will continue to sound until
the next occurrence of the same
note.
* The Duration setting is shared with the
arpeggio setting (p. 61).
* This will have no effect if Tone Env
Mode (p. 124) is set to "NO-SUS."
If this is set to "100," accents will be
added to the notes according to the
velocities specified for the notes in the
rhythm pattern. If this is set to "0," all
notes will be sounded at a fixed
velocity.
75

Advertisement

Table of Contents
loading

Table of Contents