Roland Juno-Stage User Manual page 173

27: TREMOLO CHORUS
This is a chorus effect with added Tremolo (cyclic modulation of
volume).
fig.MFX-27
L in
Balance D
Tremolo Chorus
R in
Balance D
Parameter Value
Pre Delay
0.0–100 msec
Chorus Rate # 0.05–10.00 Hz, note
Chorus Depth 0–127
Tremolo Rate # 0.05–10.00 Hz, note
Tremolo
0–127
Separation
Tremolo Phase 0–180 deg
Balance # D100:0W–D0:100W
Level 0–127
28: SPACE-D
This is a multiple chorus that applies two-phase modulation in stereo. It
gives no impression of modulation, but produces a transparent chorus
effect.
fig.MFX-28
Balance D
L in
Space D
Space D
R in
Balance D
Parameter Value
Pre Delay 0.0–100 msec
Rate # 0.05–10.00 Hz, note
Depth 0–127
Phase 0–180 deg
Low Gain -15–+15 dB
High Gain
-15–+15 dB
Balance # D100:0W–D0:100W
Level 0–127
L out
Balance W
Balance W
R out
Explanation
Adjusts the delay time from the
direct sound until the chorus
sound is heard.
Modulation frequency of the
chorus effect
Modulation depth of the chorus
effect
Modulation frequency of the
tremolo effect
Spread of the tremolo effect
Spread of the tremolo effect
Volume balance between the
direct sound (D) and the tremolo
chorus sound (W)
Output Level
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Explanation
Adjusts the delay time from the
direct sound until the chorus
sound is heard.
Frequency of modulation
Depth of modulation
Spatial spread of the sound
Gain of the low range
Gain of the high range
Volume balance between the
direct sound (D) and the chorus
sound (W)
Output Level
29: 3D CHORUS
This applies a 3D effect to the chorus sound. The chorus sound will be
positioned 90 degrees left and 90 degrees right.
fig.MFX-29
L
3D Chorus
R
Parameter Value
Filter Type OFF, LPF, HPF
Cutoff Freq
200–8000 Hz
Pre Delay 0.0–100 msec
Rate # 0.05–10.00 Hz, note
Depth 0–127
Phase 0–180 deg
Output Mode
SPEAKER, PHONES
Low Gain -15–+15 dB
High Gain -15–+15 dB
Balance # D100:0W–D0:100W
Level
0–127
Effects List
2-Band
L out
EQ
2-Band
R out
EQ
Explanation
Type of filter
OFF: no filter is used
LPF: cuts the frequency range
above the Cutoff Freq
HPF: cuts the frequency range
below the Cutoff Freq
Center frequency when using the
filter to cut a specific frequency
range
Adjusts the delay time from the
direct sound until the chorus sound
is heard.
Frequency of modulation
Modulation depth of the chorus
effect
Spatial spread of the sound
Adjusts the method that will be
used to hear the sound that is
output to the OUTPUT jacks. The
optimal 3D effect will be achieved
if you select SPEAKER when using
speakers, or PHONES when using
headphones.
Gain of the low range
Gain of the high range
Volume balance between the
direct sound (D) and the chorus
sound (W)
Output Level
173