Table of Contents
Advertisement
Chapter 10. Detailed Editing for Performances
Enabling/Disabling Reception of Messages for Each MIDI Channel (Part)
Parts 1–16 of a performance correspond to MIDI channels 1–16 of MIDI messages received from an external MIDI device.
For each channel you can specify whether MIDI message reception will be enabled (on) or disabled (off). You can also enable reception for only
specific types of messages.
MIDI FILTER Screen
Parameter
Value
Rx
OFF, ON (✔)
PC
(Program Change)
BS
(Bank Select)
PB
(Pitch Bend)
PA
(Polyphonic Key Pressure)
CA
(Channel Pressure)
OFF, ON (✔)
Md
(Modulation)
Vo
(Volume)
Pn
(Pan)
Ex
(Expression)
Hd
(Hold 1)
138
fig.disp-midifilter.eps
In the PERFORM PLAY screen, press [5 (MIDI)].
Use the cursor buttons to select the parameter that you want to edit, and use the
VALUE dial or [DEC] [INC] to turn reception on (✔ shown) or off (✔ cleared).
When you've finished making settings, press [7 (EXIT)]. You will return to the
PERFORM PLAY screen.
Explanation
Enables/disables MIDI message reception for each part.
If this is OFF, that part cannot be played. Normally, you can leave this ON, but you can
turn it OFF if you don't want a specific part to play.
Enables/disables reception of the specific MIDI message for each MIDI channel.
Advertisement
Table of Contents
