Key Range; Velocity Range - Roland Juno-Stage User Manual

Chapter 8. Detailed Editing for Patches

KEY RANGE

You can use the note number to control the way each Tone is played.
fig.TMT-K.e
The tone sounded
Level
in the lower range
Key Fade Lower
Key Range Lower
Parameter Value
Key Fade Lower
0–127
Key Range Lower C - –(Upper)
Key Range Upper (Lower)–G9
Key Fade Upper 0–127

VELOCITY RANGE

You can use the force with which keys are played to control the way each Tone is played.
fig.TMT-V.e
The tone sounded
Level
when you play softly
Velo Fade Lower
Velo Range Lower
Parameter Value
OFF, ON,
Tone Mix Velo Control RANDOM,
CYCLE
Control Switch OFF, ON
Velo Fade Lower 0–127
Velo Range Lower 1–(Upper)
Velo Range Upper
(Lower)–127
Velo Fade Upper 0–127
When using the Matrix Control to have different tones played, set the lowest value (Lower) and highest value (Upper) of the value of the MIDI
message used.
Instead of using Velocity, you can also have tones substituted using the Matrix Control. However, the keyboard velocity and the Matrix Control
cannot be used simultaneously to make different tones to sound. When using the Matrix Control to switch tones, set the Tone Mix Velo Control
parameter to "OFF."
102
The tone sounded
in the upper range
Pitch
Key Fade Upper
Key Range Upper
Explanation
Determines what will happen to the tone's level when a note that's lower than Key Range Lower
is played.
If you don't want the tone to sound at all, set this parameter to "0."
Specifies the lowest note that the tone will sound for each tone.
Specifies the highest note that the tone will sound for each tone.
Determines what will happen to the tone's level when a note that's higher than Key Range
Upper is played.
If you don't want the tone to sound at all, set this parameter to "0."
The tone sounded
when you play strongly
Velocity
Velo Fade Upper
Velo Range Upper
Explanation
Determines whether a different tone is played (ON) or not (OFF) depending on the force with
which the key is played (velocity).
RANDOM: The patch's constituent tones will sound randomly, regardless of any Velocity
messages.
CYCLE: The patch's constituent tones will sound consecutively, regardless of any Velocity
messages.
Use the Matrix Control (p. 110) to enable (ON), or disable (OFF) sounding of different tones.
Determines what will happen to the tone's level when the tone is played at a velocity lower
than Velo Range Lower.
If you don't want the tone to sound at all, set this parameter to "0."
Specifies the lowest velocity at which the tone will sound.
Specifies the highest velocity at which the tone will sound.
Determines what will happen to the tone's level when the tone is played at a velocity greater
than Velo Range Upper.
If you don't want the tone to sound at all, set this parameter to "0."