Table of Contents
Advertisement
D-Link DGS-1100-10/ME User Manual
Subtree OID: The Object Identifier (OID) Subtree for the view. The OID identifies an object tree (MIB tree)
that will be included or excluded from access by an SNMP manager.
OID Mask: The mask of the Subtree OID. 1 means this object number is concerned, 0 means do not
concerned. For example 1.3.6.1.2.1.1 with mask 1.1.1.1.1.1.0 means 1.3.6.1.2.1.X.
View Type: Specify the configured OID is Included or Excluded that a SNMP manager can access.
Click Apply to create a new view or click Delete to remove an existing view.
System > SNMP Settings > SNMP Community Table
This page is used to maintain the SNMP community string of the SNMP managers using the same
community string are permitted to gain access to the Switch's SNMP agent.
Community Name: Enter a name of the community string.
User Name (View Policy): Select the read/write or read-only level permission for the MIB objects accessible
to the SNMP community.
Figure 4.25 – System > SNMP Settings > SNMP Community Table
Click Apply to create a new SNMP community or click Delete to remove an existing community.
System > SNMP Settings > SNMP Host Table
This page is to configure the SNMP trap recipients.
Host IP Address: Select IPv4 or IPv6 and specify the IP address of SNMP management host.
SNMP Version: Specify the SNMP version to be used to the management host.
Community String/SNMPv3 User Name: Specify the community string or SNMPv3 user name for the
management host.
Figure 4.26 – System > SNMP Settings > SNMP Host Table
Click Apply to create a new SNMP host or click Delete to remove an existing host.
System > SNMP Settings > SNMP Engine ID
The Engine ID is a unique identifier used to identify the SNMPv3 engine on the Switch.
Input the Engine ID then click Apply to apply the changes or click Delete to reset back to the default value.
Figure 4.27 – System > SNMP Settings > SNMP Engine ID
2
2
6
6
Hide quick links:
Advertisement
Table of Contents
