Page of 297

Captaris FaxPress User Manual Page 27

Castelle captaris faxpress fax servers: user guide.
Also See for Captaris FaxPress:
Supplementary manual - 532 pages
Running the Setup - Important Information!
Running the FaxPress Client for Windows Terminal Server setup is different from running
the other FaxPress client installations, in that the Terminal Server must be in install
mode for the required compatibility scripts to run during setup.
For the Terminal Server to be in install mode and for the required compatibility scripts to
run during setup, you will have to exit out of the FaxPress setup, and install the
FaxPress client from the Windows Add/Remove Programs Control Panel.
Installing the FaxPress client from Add/Remove Programs in the Control Panel auto-
matically puts the Terminal Server in install mode. In fact, if you are running the installa-
tion on a Windows 2000 server, the following message will appear when the FaxPress
setup is launched.
Follow these steps to install the FaxPress client for Terminal Server:
1.
Place the
FaxPress Setup CD
FaxPress Setup screen will launch automatically.
2.
Select Exit. DO NOT select Install FaxPress from the Captaris FaxPress Setup
screen. Select Exit
Note: The Terminal Server must be in install mode for the required
compatibility scripts to run during setup. You must install the FaxPress client
from Add/Remove Programs in the Control Panel to automatically put the
Terminal Server in install mode.
3.
After exiting out of the Captaris Fax Press setup, open your Add/Remove Pro-
grams Control Panel. (
) The Add/Remove Programs interface and procedure will vary depending
grams
on what Windows OS you're running.
4.
From the Control Panel window, double-click on Add/Remove Programs.From
the Add/Remove Programs Properties window, click Install.
5.
Click Next>.
6.
In the Run Installation Program window, install.exe will appear in the Com-
mand line for installation program field. Click Next>.
7.
In the Change User Option window, select All users begin with common ap-
plication settings, then click Next>
8.
In the Welcome to FaxPress Installation screen, click Next>.
9.
From the Select Components screen, select Install FaxPress Client for Mi-
crosoft Terminal Server, then click Next>
10. In the Default Protocol window, select the TCP/IP, IPX/SPX
dio button, then click Next>.
FaxPress User Guide
User Guide > Installing the Client on Windows Terminal Server
into your computer's CD-ROM drive. The Captaris
.
Start>Settings>Control Panel>Add/Remove Pro-
.
.
or NetWare 5 ra-
,
17

   Also See for Captaris Captaris FaxPress

Comments to this Manuals

Symbols: 0
Latest comments: