Table of Contents
Advertisement
the FaxPress Server name or IP address from the pulldown menu. Enter the
user's FaxPress User Name and Password, then click the Verify Login button.
Note: Login is automatic and occurs when you open the mail client. If the
transport can't log onto the server, you will be notified only after you try to send
a fax. Use the Verify Login button to confirm login.
7.
A Login successful message will appear if the transport is able to connect to the
Faxpress server. Click OK.
8.
Select the General tab, then enter the user's Exchange or Outlook User Name.
Select FAX from the Email Type pulldown menu. Click OK, then exit.
9.
From the user's mail Properties dialog box, and select the Delivery tab. Select
FaxPress Exchange Direct from the list of information services, then click the
arrow to place it first in the list.
Up
10. .Select the Addressing tab, then click Add. . .
11. From the Add Address List window, select Contacts and click Add
to save and exit.
12. Contacts should now appear as an address list option. Click Apply
exit.
13. Close all programs and reboot the Terminal Server. After rebooting, have all the
users log in and send test faxes to confirm the setup's success. Also, make sure
any shared resources, such as network drives or printers, are set up for each user
before using FaxPress.
Installing on a Novell Network
In a Novell Netware environment with an active Microsoft Windows Terminal Server, Fax-
Press uses TCP/IP for FaxPress server to client communication.
To confirm that the FaxPress is able to communicate using TCP/IP:
the FaxPress server must be assigned an IP address.
the FaxPress client must be set to use TCP/IP as the default network protocol, a
selection made during the client setup.
the FaxPress must be able to successfully send and receive test faxes.
To assign the FaxPress Server an IP address, follow these steps:
1.
On a Windows 95/98, Me, NT or 2000 workstation with the FaxPress Client for Ad-
ministrators installed, launch the FaxPress Configurator for IPX/SPX.
(
Start>Programs>FaxPress>Administration Tools> FP Configurator
for IPX/SPX
2.
In the FaxPress Configuration (IPX protocol) window, enter your FaxPress
Server's serial number, click Show Settings, then IP settings
FaxPress User Guide
User Guide > Installing the Client on Windows Terminal Server
)
Click Close
.
then OK to
,
.
21
Advertisement
Table of Contents
