Displaying The Controller Information - Omron ZFX-C10 User Manual

Monitor conditions
Edit the test string and echoback setting.
MENU mode - [Tool] - [I/O mon.] - [RS-232C/422]
Setup Item Description
Monitoring The content sent to the external device and content received from the external device are displayed.
Test string Sets the text string (maximum 16 alphanumeric characters) to be sent to the external device.
Echoback Sets whether or not the content received from an external device is to be returned to that device as it is.
ON: The content received from an external device is sent to that device as it is. (default value)
OFF: The content received from an external device is not returned.
Parallel Communication
You can check the communication status on the parallel interface.
Parallel
DI0 DI0 DI2 DI3 DI4 DI5 DI6 DI7 DI8 DSA
TRG
DO2 DO3 DO4 DO5 DO6 DO7
OR ERR DO0 DO1
RUN BUSY DO8 DO9 DO10 DO11 DO12 DO13 DO14DO15
MENU mode - [Tool] - [I/O mon.] - [Parallel]

Displaying the Controller Information

Display the Controller's system information. This information allows you to check the version, memory usage,
and other information.
MENU mode - [Tool] - [Sys Info]
Setup Item Description
Version Displays the Controller's version.
Memory capacity Displays the memory usage.
ZFX-C User's Manual
SD
Input signals
A reversed signal indicates that an input from an external device
to the ZFX-C is ON.
GATE STG0 STG1
Output signals
A reversed signal indicates that an output to an external device
from the ZFX-C is ON.
You can simulate turning output signals ON/OFF by selecting the
signal to be tested on screen.
127
Tools