Display Settings; Eco Display - Omron ZFX-C10 User Manual

Binary format
When outputting measurement values in binary format, set the following items. Setup of other items is not
required as they are for ASCII format.
MENU mode - [System] - [Output] - [Date format (Serial)/(SD Card)]
Setup Item
Output form
Display at time
File name
Note
Output format
The value obtained by multiplying the measurement value by 1000 times is output continuously as 4 bytes per single
data item. Minus numbers are output as 2's complement.
<Measurement value of data 0 x 1000> <Measurement value of data 1 x 1000> ... <Measurement value of data 31 x 1000>
4 bytes
Example: When data 0 is "256.324" and data 1 is "-1.000"
$00 $03
Data 0: 256324
(256.324 x 1000)
When Display at time is set to "ON", the data is prefixed with the time information.
<Year/month/day/hours/minutes/seconds><Measurement value of data 0 x 1000><Measurement value of data 1 x 1000>...<Measurement value of data 31 x 1000>
6 bytes
Year, month, day, hours, minutes, and seconds are
assigned to each byte.

Display Settings

Set the Controller's display conditions.

ECO Display

The ZFX-C has an ECO mode display function for darkening the LCD screen to suppress current consumption
when control keys or menu buttons are not operated for three minutes or more. Set this item to ON to enable
the ECO mode display function.
The ECO display setting is enabled only in the RUN mode.
MENU mode - [System] - [Display] - [Eco mode]
Setting value
ON
OFF
118
System Settings
Description
Selects binary.
Prefixes the output data with time information.
Range: OFF (default value), ON
Sets the name of the output file. (only when SD card is selected)
$E9 $44 $FF $FF$FC $18
Data 1: -1000
(-1.000 x 1000)
Description
Enables the ECO mode display function. (default value)
Disables the ECO mode display function.
4 bytes 4 bytes
ZFX-C User's Manual