Basic Knowledge For Operation; Input Methods - Omron ZFX-C10 User Manual

Basic Knowledge for Operation

Input Methods

The ZFX-C uses three input methods: input by the touch pen, input by operating the keys on the front of the
Controller, and input from the console.
Input by the touch pen
<Tapping>
Top menu
System
Tool Bank
Setup
Tap the desired part with the
touch pen.
Key entry from the Controller/Console
Controller
OMRON
ZFX-
Total OK 353ms
Bank000
0.Item000
Judge
Correlation
Position X
Position Y
Previous
Name
(1) AUTO key
(2) ESC key
(3) SET key
(4) ← L key
→R key
↑ UP key
↓DOWN key
(5) Function keys
176
Basic Knowledge for Operation
Setup menu
Shape
Size
Sensiti.
Pattern
Edge
Bright&Color
Application
Save Cameras Position
Register Add func
Item
This selects/applies the part you
tapped.
(1)
USB
OUTPUT RUN ERROR ENABLE
SD
SD
Individual result CARD
ADJ
MENU RUN
(2)
OK
92
462
AUTO ESC
352
Next Capture (3)
Display sw
SET
PULL OPEN
(4)
(5)
Function
Executes automatic setup of measurement conditions.
This key is enabled only when the [AUTO] icon is displayed on the LCD screen.
Returns to the previous menu or cancels the current menu.
Applies each item.
Changes movement of the focus or numerical values in the
following screens:
• Item selection • Threshold value parameter selection
• Parameter setup • Measurement region setup
• Numerical value setup
Directly sets each item that is dis-
played on the LCD screen.
The function varies according to
the display screen.
<Dragging>
Size Apply Cancel
Tap any point in the screen and
move the touch pen in this state.
Console
AUTO AUTO ESC ESC
SET SET
Total OK 353ms Individual result SD
Bank000
0.Item000
Judge OK
Correlation 92
Position X 462
Position Y 352
Previous Next Display sw Capture
1 2 3 4
Size Apply Cancel
The region is moved or resized by the
amount that the touch pen is moved.
(1)
(2)
(3)
(4)
(5)
Order of focus movement
2 3
1
Menu button
Displays the function
corresponding to the
function key.
ZFX-C User's Manual