Overview Of Settings And Measurement; Operation Modes - Omron ZFX-C10 User Manual

Overview of Settings and Measurement

Operation Modes

ADJ ADJ
MENU MENU RUN RUN
Mode Description
MENU mode This mode is for setting the measurement
conditions. The easy-to-follow icon-based
display allows operations to be performed
intuitively.
ADJ mode This mode is for checking the measure-
ment status and adjusting conditions.
Measurement results are only displayed
on the monitor and are not output.
RUN mode This mode is used for performing actual
measurement. Measurement results are
displayed on the monitor and output.
ZFX-C User's Manual
The ZFX-C has the following three modes. Switch to the desired
mode before you start operation. To switch the operation mode,
use the mode switch.
Mode switch
Top Screen
Top menu
LIVE
TEA
System
Tool Bank
Setup
Top Screen
OK 353ms Individual result
0.Bank00
0.Pattern Search
Judge OK
Correlation 92
Position X 462
Position Y 352
Angle 15
Previous Next
Dsplay SW
Top Screen
Individual result
OK 353ms
0.Bank00
0.Pattern Search
Judge OK
Correlation 92
Position X 462
Position Y 352
Angle 15
Previous Next
Dsplay SW

Overview of Settings and Measurement

Save
Adjust
Capture
31